Product Description
Turban Heavy Präzipress 120 mm – single-stage press with three columns
The Turban Heavy Präzipress 120 mm is a top-tier single-stage press. With its triple-guided design and play-free mechanics, it delivers exceptional dimensional accuracy and repeatability. The press aligns cases and dies perfectly with each other, ensuring precise handloads even for large-calibre cartridges.
- Three-column design
- Stroke height 120 mm
-
Head plate thread 1 ½ × 12 UNF with adapters for 1 ¼ × 12 UNF and 7/8 × 14 UNF included
-
Ram thread 7/8 × 14 UNF with adapter for standard shell holders included
- Capable of loading cartridges up to .408 CheyTac
The Heavy Präzipress 120 mm operates on the linear guidance principle, as used in high-precision stamping and forming tools in the engineering industry. Three hardened guide columns centre the ram over the entire stroke length. This design minimises play and achieves tolerances within one hundredth of a millimetre.
Conventional cast presses typically have tolerances around one tenth of a millimetre. The Präzipress is therefore about ten times more precise, completely eliminating backlash, misalignment and angular deviation. Cases and dies remain perfectly concentric, ensuring uniform seating depth and reproducible results.
All components of the press are made from solid tool steel. The ram runs smoothly and free of play in maintenance-free plain bearing bushes. The symmetrical design provides linear force transmission without any tipping moments, ensuring even pressure distribution.
The press is designed for standard shell holders and dies, and operates just like a classic O-frame press—no retraining required. Thanks to its high rigidity and precision guidance, even large cartridges such as the .408 CheyTac can be reloaded with ease.
Key features
- O-frame press with three guide columns and centring slide
- Linear guidance across the entire stroke for maximum axial precision
- Window height 150 mm
- Guide and ram columns as well as pivot pins precision-ground and hard-chromed (68 HRC)
-
Column diameter 30 mm for maximum rigidity
- Maintenance-free solid-lubricant plain bearing bushes from Misumi
- No cast or aluminium parts
- High centring accuracy, no perceptible play or offset
- Symmetrical construction with linear force transfer, no tipping moment
- Precise stop at top dead centre, constant seating depth without spring-back
- Primer disposal through an internal ram channel
- Handle mountable on either side
- Patinated surface, cleanly rounded edges
- Tight tolerances and smooth, play-free operation
Technical data
| Press type |
Single-stage / O-frame press |
| Material |
Tool steel, CNC machined |
| Guidance system |
Three columns with linear guidance |
| Stroke height |
120 mm |
| Press window height |
150 mm |
| Column diameter |
30 mm |
| Head plate mount |
1 1/2 × 12 UNF with adapters for 1 1/4 × 12 UNF and 7/8 × 14 UNF |
| Ram mount |
7/8 × 14 UNF for standard shell holders |
| Compatibility |
RCBS and Triebel shell holders |
| Surface hardness |
68 HRC, precision-ground and hard-chromed |
| Press force |
up to 3.5 t |
| Suitable for |
Handguns and rifles |
| Type |
Single-stage |
| Manufacture |
Made in Germany |
Scope of delivery
- Turban Heavy Präzipress 120 mm reloading press
- Primer collection tray
- Mounting screws and washers
- Open-end wrench SW 24
- Hook wrench 52 / 54 mm
- Thread bushing 1 1/2 × 12 UNF to 7/8 × 14 UNF (pre-installed)
- Thread bushing 1 1/2 × 12 UNF to 1 1/4 × 12 UNF
- User manual
- Delivered without shell holder
